High thermal performance
Clip-on features - fast to fit
No visible fixings
Simple neat design
Made to Measure
- UK mainland delivery
- Stock sizes fast delivery
- Complies with BS EN 12101-2
- Great U values
- Available in Double & Triple Skins
- Wind deflectors available to improve aerodynamic performance
- A range of finishes available
Click Tabs Below To Reveal More Information
Mardome SV Trade Smoke Vent Rooflights offer a reliable, contemporary and robust smoke system which maximises natural light entering the building.
Brett Martin Daylight Systems Mardome Trade Smoke Vents are individual polycarbonate dome rooflights intended for installation on flat roofs of all modern building types to provide natural smoke and heat exhaust ventilation and comfort ventilation. Mardome Trade Smoke Vents are designed and manufactured in the UK. These products are fully tested and certified in accordance with EN12101-2 : 2003.
Please see fitting instructions below and downloadable PDF link at the bottom of this page and product data sheet..
Range of Sizes
Available in sizes from 1050x1050mm up to 1800x1800mm which stagger up in 150mm increments. If your size doesn’t appear here, we will be happy to assist with any query.
Measuring Guide for fitting to builders upstand
Measure internal AND external builders upstand
Internal builders upstand = (dome size - 150mm) +20/-0
External builders upstand = dome size +40/-20mm
If you are installing on your own upstand, the upstand height should be 200mm. For example, on our website is a drop-down menu for you to order from, ff you choose 1050x1050mm this would mean your structural opening would be 900x900mm. The builders upstand should be 75mm in width.
Measuring Guide for domes with PVC kerb
Measure internal roof opening
Acceptable tolerance = dome size +20/-30mm
If you purchase with an upstand then the size you order from our website’s drop-down menu will be the structural opening measurement (shown in the diagram above in red). Please note this does not apply if you fit on your own upstand.
Centre pane U-value is a measure of the thermal efficiency of the glazing type.
Ud-value is a measure of the thermal efficiency of the whole rooflight (calculated in accordance with NARM Technical Document NTD2).
Part L Building Regulations require a U-value of at least 2.2W/m2K: Brett Martin Daylight Systems recommend the use of at least triple skin rooflights in all applications
The table below shows Reflex polycarbonate rooflight light’s transmission properties:
Clear - high visibility
Maximum transmission of light
Elevated transparency of vision of everything through the dome
Opal - diffused light and solar control
Ties privacy with top levels of diffused light generation
Prevents solar glare and minimises solar heat gain
Reduces sight of all objects through the dome
Patterned - privacy
Partners increased levels of light transmission with privacy
Diffused light of day
Impairs the optical production of materials through the dome
Bronze - solar control
Restricts solar glare and heat gain
Offers a lower transmission of light
To enquire about additional options please call or email us.
Fire and Comfort Ventilation Control Panel - EN12101-10 certified.
Fireman's Priority Switch with break glass to open/close Smoke Vent without influencing the alarm.
Fire Switch with break glass to open Smoke Vent and activate the alarm.
10 year manufacturers warranty.
These dual-purpose smoke vent roof lanterns allow more daylight to penetrate into rooms and function as an effective active fire protection system too. Designed to open in the event of a fire, the opening mechanisms may be triggered manually or automatically, depending on the design of the system in which the lanterns are installed. Available with either double or triple layer polycarbonate domes, they are also very thermally efficient, making them a good choice for both residential and commercial buildings in the United Kingdom. If you are looking for roof lanterns to form part of a fire protection system and you want to make sure they won’t compromise the existing insulation in your property, Mardome smoke vents are the perfect solution.
Fully Certified Smoke Vent Roof Lanterns
Certified to CE EN12101-2, all units are assembled and tested at the factory to ensure full compliance with this standard. As fully certified smoke vents that have been designed and manufactured in accordance with the Building Regulations on Fire Safety, they are suitable for installation in all types of residential and commercial properties, including rental properties and properties with communal spaces.
Configuring Manual or Automatic Operation
The control panel supplied with our smoke vent roof lanterns may be triggered manually with a local override switch. Alternatively, the control panel may be integrated into an existing fire alarm or smoke detection system for automatic operation. In either case, the vents will open immediately to provide effective smoke and heat extraction in the event of a fire. Please note, the control panel has a battery backup power supply included, ensuring that the vents will open even if there is no mains electricity.
Your Choice of Glazing
As our smoke vent roof lanterns are made to order, you can choose which type of glazing you would like to have installed in them. The options include double or triple layers of either clear, patterned or opal polycarbonate sheeting.
Secure Smoke Vents
Some property owners are hesitant to install smoke vents in case the security of their buildings is compromised. However, these vents are fitted to the roof with fixings that are concealed inside security caps, ensuring they are not an easy target for opportune thieves who are operating in your area.
If you are ready to purchase, you can select your preferred options and place your order on our website now. If you need any assistance, please call or email us.
This product can be delivered within 7-10 working days for most sizes.
You will need to ensure an appropriate person is designated and on site to offload the product out of the vehicle when the driver arrives.
We recommend arranging equipment and installation after the item has been delivered. Please Note lead time to Ireland will be longer than the standard lead time above.